Select Staffing has a great opportunity for a Stockroom Clerk in Chatsworth, CA within a manufacturing company

Pay: $18.00 Hours: 7:00 am – 3:30 pm Schedule: Monday – Friday 

• Learn technical skills to drive continuous improvement across manufacturing
• Performs routine organization and moving of parts with accuracy
• Pull parts for kits and put parts way correctly
• May pull parts in yard with ability to a pallet jack
• Transferring stock inside the facility
• Assisting with stock-taking activities
• Maintain a safe and clean work environment as well as follow Cod of Safe Work Practices
• Ability to do repetitive tasks with consistent accuracy and quality
• Follows and adhere to company quality system in work processes

Job Title: Door Installer (Entry Level)

Location: Pontiac, MI

Employment Type: Direct Hire

Pay Rate: $20/hr

Job Description:

We are seeking a dedicated and reliable Door Installer to join our team in Pontiac, MI. This is an entry-level position with opportunities for growth and development. As a Door Installer, you will be responsible for installing various types of doors, ensuring they are properly fitted and functional.

Key Responsibilities:

• Install residential and commercial doors, including entry, garage, and overhead doors.
• Perform heavy lifting and manual labor as required.
• Ensure all installations meet safety and quality standards.
• Communicate effectively with team members and clients.
• Stay until the work is completed each day.

Requirements:

• Valid driver’s license.
• Reliable transportation to and from job sites.
• Ability to perform heavy lifting and physical labor.
• Willingness to learn and adapt to new tasks.
• Punctuality and reliability; must come to work on time every day.
• Basic English communication skills.

Preferred Qualifications:

• Previous experience in door installation or general labor is a plus, but not required.
• Strong work ethic and a positive attitude.

If you are a hardworking individual looking to start a career in door installation, we encourage you to send your resume and a brief cover letter outlining your qualifications and interest in the position to [email protected], subject line: “Door Installer”.

Production associates wanted in the Hannibal, MO area. 

Shifts run 12 hours on a rotating schedule, 2-2-3 schedule. 

– 6am to 6pm – $15/hour

– 6pm to 6am – $15.45/hour 

Overtime possible when needed! 

Production associates will be responsible for:

• packaging and processing operations
• sanitation as needed
• Creating high quality products
• Assisting with change overs 
• Working with operators
• Other duties as assigned

We offer:

• Weekly pay and benefits
• Free online courses to further your career
• Referral bonuses

Apply now!

• Must be able to lift up to 50 lbs
• Must be able to perform physical tasks for extended periods of time including standing, walking, climbing, bending, pushing, pulling and twisting
• Ability to climb and/or work at heights 
• Ability to wear protective clothing and equipment such as safety shoes, etc.
• Ability to follow GMPs
• Ability to work in hot, cold, noisy, dusty, wet environmental working conditions
• Willing to work around industrial high-speed moving machinery
• Ability to work with allergens that might be present in the environment

#nowhiring

Immediate Hiring for Assembly/Packaging, Piqua OH.

Shift: 2nd, 3rd

Pay: $17-$20

Job Description for the machine operator/ assembly:

• Inspect and sort finished product
• Stack product onto skids, label and shrink wrap
• Assembly of spools
• machine operating

Job requirements for the machine operator/assembly:

• Must be able to stand the entire shift
• lifting ( light weight)product, bending and stooping

Apply Now

Assembler Job Details:

• Perform hands-on tasks
• Assemble small part medical devices in clean room environment
• Accurate recordkeeping and inventory documentation
• Inspection of product

On Site Perks

• Paid Lunches
• Onsite Fitness Center
• Onsite Cafeteria

ResourceMFG Offers:

• Weekly Pay
• Paid training
• Medical, Dental, Vision and 401K
• Mobile App
• Free online courses
• Discounts and more

• Able to use basic hand and power tools
• Basic Math
• Basic computer skills
• Ability to read, speak, and take directions in English
• Ability to follow GMPs 
• Complete Drug Screen and Federal Background Check
• High School Diploma or GED

Resourcemfg Hiring Painter In Imperial Pa

7am-330pm

Pay $18-$23.00

Monday – Friday

• Paint large steel parts with high pressure paint guns
• Properly maintain all painting equipment
• Create and implement the best painting technique for the dock leveler application.
• Active member on the launch team implementing the painting, welding, and assembly processes
• Accountable for every aspect of their work

• Verifies the process of painting the product meets all requirements.

• Versatile in performing different manufacturing tasks/duties.
• Understand basic manufacturing processes.
• Ability to comprehend blueprints, schematics, and work specifications

• Experience with Lean, Six Sigma, Kaizen, Kanban, and 5S
• Analytical problem solver timely manner
• Familiar with ERP systems and concepts, SAP preferred

Sit-Down Forklift Needed in the Santa Teresa Area

Location: West Side

Shift: 5am-1pm, 12pm-8pm Monday – Saturday

Pay Rate: $14/hr

Weekly Pay

Holiday Pay

Medical/Vision/Dental

Job Description: 

• Obtains copy of production schedule or shipping order and transports material or equipment to and from designated areas in the facility
• Loading and unloading goods from vehicles such as trailers.
• Moving goods packed on pallets around the warehouse facility
• Stacking goods and following inventory control instructions.
• Checking loads are secure
• Stacking empty pallets
• Performing daily equipment checks
• Examining products to verify conformance to quality standard

• Minimum of 6 months recent experience
• Ability to work standing long hours
• Ability to read, write and follow written and verbal instructions
• Ability to perform required functions with a minimum of direct supervision in task of routine
• Applies acquired knowledge and skills to complete standard tasks
• Readily learns and applies new information and methods to work in assigned area
•  Maintains appropriate licenses, training and certifications

Day and Night Shift Warehouse Packing Positions

Entry Level position – No Education Requirements or Experience Needed

Work only 15 days in a month and get paid 40 hours each week

Night Shift: 7Pm to 7AM

• $16/hour-night shift
• 40 hours per week schedule
• 2-2-3 Schedule 

Packer Job Description Includes:

• Only Work 15 Days a Month 
• Every other weekend is a 3-day weekend
• Work no more than 3 consecutive days
• Light industrial manufacturing. Packing Styrofoam products

Benefits:

• Weekly pay.
• Over time available

Don’t miss this great opportunity apply today! 

• No Experience required. Willing to learn new skills.
• Great attitude and attendance. 

Apply Now!

Employbridge is supporting our client in Cartersville, GA looking for Sitdown Forklift Drivers! Please see details below if interested. 

• Must know how to operate Sit-down Forklifts

• Multiple layers of Loading & unloading, stocking, and delivering materials from container trailers to assembly

• Stacking pallets or materials correctly. following inventory control instructions

• Performing daily equipment checks such as checking fluid levels, cleaning air filters, battery or LP tank, monitoring power source, and examining equipment for damage

• Unload inbound freight with a forklift and store it as directed by the supervisor

• A complete inspection of the forklift at the start & end of each day

• Must maintain a clean & safe working environment following OSHA standards

• Comply with all OSHA and MSDS standards

  Available Shifts:

  Mon – Friday: 8am – 5pm ($18/hr)
  Day: 7am – 7pm ($18/hr)
  Night: 7pm – 7am  ($19/hr)

Apply at www.employbridge.com or text (706)625-1125 if interested.

• High school diploma

• Forklift certification preferred

• Must know how to take out palletized materials in & out from containers

• 5 year of warehouse experience preferred

• 5 year of forklift operation experience preferred

ResourceMFG is now hiring Diesel Mechanics for a great company in East Tulsa!

Pay: $23-35; Depending on Experience

Shift: 1st; 6am to 4:30pm with overtime as mandated

JOB DETAILS

• Performs main component changes on engines, pumps, transmission, etc.
• Develops skills on basic electrical and hydraulic systems and operation of main and auxiliary equipment for maintenance purposes.
• Completes DOT inspection and auxiliary reports after unit inspection is completed.

•  Must have own hand tools and power tools.
• Minimum 5 years’ experience (Or trade school Graduate).
• Troubleshooting electronic controls for various equipment.
• Rebuilding engines and transmissions.
• Background and drug screen

Parts Cleaner needed in Deer Park!

Looking for a Mechanic / Parts Cleaner that in mechanically inclined and willing to work hard. Parts cleaning experience is a plus.

This is a 1st shift position Monday-Friday

Pay will start at $18.
2+ years experience required
Duties will consist of cleaning parts, painting, and pulling parts from engines.
This is a non AC environment.

As a ResourceMFG Employee We Offer You:

Competitive pay
Paid weekly (Direct Deposit or ATM Debit Card available)
Access to health benefits and retirement plan
A personal recruiter to help with job searches and assistance when at work!
FREE ONLINE skills training

CAD/Office Assistant

Burton, MI

8a-5p Monday-Friday, $17-20 per hour based on experience

Job Description:

We are seeking a highly organized and technically skilled CAD/Office Assistant to join our team. This position offers an hourly wage of $17-20, depending on experience. The ideal candidate will have strong organizational abilities, proficiency in Microsoft Office, experience with Google Sheets, and knowledge in AutoCAD, Solid Works, or Fusion360.

Responsibilities:

• Create CAD drawings for the CNC department using AutoCAD, Solid Works, or Fusion360.

• Develop and maintain job lists for the CNC department through Google Sheets to ensure organization and efficiency.

• Assist with scanning and creating shippers in Fulcrum during downtime.

• Provide support by answering phones and performing general office tasks as needed.

• Collaborate with the CNC department to ensure accurate and timely completion of projects.

Requirements:

• Strong organizational skills and attention to detail.

• Proficiency in Microsoft Office (Word, Excel, etc.) and Google Sheets.

• Knowledge and experience with AutoCAD, Solid Works, or Fusion360.

• Ability to work independently and manage multiple tasks efficiently.

• Excellent communication skills and a team-oriented attitude.

Experienced Shipping Tech needed in Stokesdale, NC. Will be exposed to the elements. Awesome performance to hire opportunity!

Pay: $20hr

Mon – Friday 6m – 2:30pm (plus overtime as needed)

• Must have Sit Down Forklift Experience.
• Solid knowledge of shipping and receiving functions, procedures, reporting, attention to detail, Overhead crane(trained on), prepare reception area to receive incoming cargoes, flow of packages after shipment, loading and unloading of trucks, Storage Facility for finished Generator product.

Apply now !

Why work for ProLogistix/ResourceMFG?

• Great places to work
• Weekly pay periods
• Unlimited referral bonuses
• Health / Dental / Vision Benefits offered 
• FREE career focused online classes

Apply Now!

Well known company in Marion County. Looking to add an experienced machine operator to their workforce. Mixer operators will be cross trained. Forklift knowledge required.

$17.00 per hour + Shift Premium

• 1st Shift  7am to 3:00pm; Monday – Friday TRAINING ONLY-THEN 2ND OR 3RD
• 2nd Shift 3pm to 11:00pm; Monday – Friday
• 3rd Shift 11pm to 7:00am; Sunday – Thursday
• Overtime may be required
• This is a Fulltime; temp to hire opportunity – FAST Conversion to client hire on!

Requirements & Qualifications:

Must be able to stand and work scheduled shift.
Must be able to work 50-60 hours per week.
Must be able to train on 1st shift prior to starting on 2nd or 3rd.
Steel toe shoes required for specific job opportunity

Requirements

We are seeking a skilled and detail-oriented Manual Machinist to join our team.

The ideal candidate will be responsible for creating precision components, repairing machinery, and maintaining a clean and safe work environment. This role involves both standard machining tasks and special projects, requiring a strong understanding of mechanical drawings and precise measurements.

Qualifications:

• Minimum of 5 years experience as a MANUAL MACHINIST
• Proven experience working with lathe machines and other machining equipment.
•  Proficiency in welding, grinding, gear shaping, and sheet metal work.
• Ability to produce precise components, ensuring specifications are met.
• Consistent attendance, strong work ethic, and a commitment to achieving production targets.
• Skilled in reading mechanical drawings and using measuring tools for quality checks.
• Willingness to work various shifts and adapt to changing job requirements.
• Commitment to maintaining a safe work environment.

What We Offer:

• Competitive salary
• Weekly Pay 
• Opportunities for professional growth and skill development.
• A collaborative and supportive team environment.
• Challenging projects that allow for the development of technical skills.
• Eligible for Medical, Dental, Vision, Term Life, short term and disability insurance 
• Free online classes for professional and personal growth 
• Bonuses and much more

Hiring a Electronic Bench Technician for a great company in Tulsa

Pay: $23.00-$28.00 an hour, Based on experience

1st Shift:  Monday through Thursday,  4-10’s 6:00a.m.,-4:30p.m., with a 30 min lunch….off on Friday-Sunday , although we have been working OT due to in house volume. 7a.m.-11a.m.-Saturdays.

As a Electronic Bench Technician Associate We Offer You:

• Competitive pay
• Paid weekly (Direct Deposit or ATM Debit Card available)
• Access to health benefits and retirement plan
• A personal recruiter to help with job searches and assistance when at work!
• Free ONLINE skills training

Job Responsibilities: 

• Electronic Bench Technician
• Repairing circuit card assemblies down to component level 
• Electrical and Mechanical Assembly
• Read and understand written instructions/spec sheet and hand physical requirements of the job 
• Testing
• Troubleshooting
• Soldering 

Job Requirements

• Experience:
• 3-5 years of experience bench testing required
• Experience repairing circuit card assemblies down to component level 
• Electronic Theory experience is required 
• Electrical and Mechanical experience (On the job experience, vocational schools, military schooling, Naval, etc.)
• Must be able to read and understand written instructions/spec sheet
• Hand physical requirements of the job which include lifting to 40lbs with or without assistance, bend, walk, stoop, for up to 12 hours per day.

• Why work here? 
• Great company culture 
• Full coverage health insurance once hired full time! 
• Life Insurance 
• 401K Matching 
• Dental & Vision at a minimal cost 
• Career Path
• Pay raise based on production

Apply Now!!! Work for ResourceMFG, a company Clearly Rated named us a "best in class" employer!

Working for ResourceMFG If you’re looking for a job in manufacturing, ResourceMFG specializes in you! We are America’s largest staffing company with over 30 years in business, putting more than 24,000 people to work nationwide, each week. A company that treats you like family, we’re committed to providing equal opportunities to all, a healthy and safe work environment, fair pay and the tools to succeed and grow.

Looking  for a full-time job with BENEFITS? Can you start work immediately?  If so, APPLY HERE! 

Quality Technician needed immediately in the NE Columbia area!

Shift- 1st Shift

Hours:  6:00AM – 4:30PM  Mon-Thurs.

Pay:  $18.00 – $22.00 per hour (depending on experience)

Quality Technician Job Responsibilities: 

• Working from blueprints, drawings, process documents, and using a wide variety of tools, gages, jigs, and measuring equipment, audits processes at various stages of manufacturing operations to assure customer receipt of a quality product.
• Provides simple work instruction to manufacturing employees relative to: product quality requirements, measurement techniques, measuring equipment use and care, process control characteristics and frequency.
• Operates and analyzes simple to moderately complex data from sophisticated measuring devices such as CMM, Laser gages and programmable measuring devices including Multi-axis and linear.
• Prepares documentation of quality, prior to product movement, both inside the company and to customers for outside processing.

Quality Technician Job Requirements:

• 2 years of quality technician experience
• Solid work history
• Experience working with blueprints/drawings.
• Use gages, jigs, and measuring equipment
• Data entry
• Good attendance
• Follow directions.
• Work independently and in a team environment.

 Apply Now!

We are looking for Machine Operators in the Winchester area! Full time temp to hire positions!

Shift: 12 hour schedule, 2-2-3

7:00am – 7:00pm
7:00pm – 7:00am
Pay: $17/hr-$18.25/hr

Job Duties: 

• Pull parts from mold, inspect, trim, count, and stack on pallets.
• Visual inspect in process, finished products and pallets.
• Assist in general clean-up of the plant and machines.
• Pallets re-work as required.

Benefits:

Weekly Pay
Medical, Dental, and Vision insurance available
Free Online learning to enhance your career
Apply Today!

#RMFGINDEED 

Qualifications:

• Work in a fast-paced environment
• Must be able to do repetitive work
• Responsible for quality control
• Verbal and written communication
• Ability to work in a non-climate controlled facility
• Effectively communicate suspected production problems to your supervisor

Resource MFG has an immediate opening for an experienced Industrial Painter in Lansing!

2nd shift
$18.50 – $24.00 per hour based on experience 

A manufacturing company in Lansing is looking for an Industrial Painter to join their team! This role can be temp to hire or direct hire based on experience. This is a 1st shift opportunity !

Industrial Painter Duties Include:

• Preparing parts for painting
• Sand blast parts as needed
• Operate power equipment, forklifts and cranes
• Apply paint and other coatings to surfaces
• Other duties as assigned

Why Resource MFG?

• Weekly pay
• Referral program
• Mobile App

Apply Today 

ResourceMFG is looking for Production Associates for long term positions and available schedules needing to be filled for a company which entails entry level assembly of electronic parts.

D12-Thursday to Saturday 6am to 6:30pm (15.54/hr)

D10-Sunday thru Wednesday 5am to 3:30pm (14.00/hr) 

N10- Sunday thru Wednesday 3pm-1:30am (14.50/hr) 

You’ve Picked the Perfect Company! Are you interested in working with an awesome team of people and a great company that values its employees? If so, this is for you! ResourceMFG is NOW HIRING! This position comes with competitive weekly pay, benefits and FREE skills training. Come join our winning team!

As a ResourceMFG Associate We Offer You:

• Competitive pay
• Paid weekly (Direct Deposit or ATM Debit Card available)
• Access to health benefits and retirement plan
• A personal recruiter to help with job searches and assistance when at work!
• FREE ONLINE skills training

Job Description: Responsible for subassembly of electronics parts

• Work with a team to assemble entire products or components
• Rotate through tasks for specific production processes
• Conduct quality inspections on products and parts
• Prepare finished products for shipment
• Maintain a clean and orderly work area

Job Requirements: 

• Must be able to read, write and speak English fluently 
• Must have good math skills and ability to reason 
• Minimum of 6 months-1 year of related experience 
• Must be able to use volt/ohm meter 
• Knowledge of calipers, micrometers and other assorted precision measurement tools and instruments

Now Hiring for Production Workers!

Long term career potential with growth!

12 hour rotating shift- 2 weekends a month

Job duties include:

• Working on production line
• Feeding raw material into machines
• Checking for quality
• Packing product for shipment
• Discarding unusable product/plastic in grinding machines
• Keeping a clean work area
• Other duties as assigned

We offer:

• Weekly pay
• Benefits
• Free online courses to further your career
• No screening costs!

Don’t wait apply today!

#nowhiring

• Previous experience in warehouse setting
• Ability to stand for 12 hour shift
• Ability to bend/stoop/lift/twist and perform repetitive motions
• Commitment to attendance and punctuality
• Ability to follow GMPs
• Ability to work in hot environment

#nowhiring

Immediate Openings for Entry Level Warehouse Associates in Fenton!

Great long term opportunities with career and growth potential

Multiple Shifts Available!

Warehouse Associate Job Duties include but not limited to:

• Packing materials
• Picking orders
• Keeping a clean work station and area
• Assembling product
• Following instructions
• Feeding raw materials into machines
• Other duties as assigned

ResourceMFG offers:

• Weekly pay
• Benefits for all associates
• Free online courses

#nowhiring

Ability to work with computers

Ability to stand, walk, bend, stoop for 8+ hours

 #nowhiring

Immediately Hiring!
Repair Technicians

$20.75 per hour
*Resume Required

We are looking for qualified individuals for our Information Technology Manufacturing Client in LaVergne, TN. 

The schedule for 1st and 2nd shift Repair Techs:

•  1st – Mon – Fri 7:00am – 3:30pm
• 2nd shift – Mon – Fri 4:30pm – 1:00am

Benefits of working with ResourceMFG:

• Weekly pay with direct deposit options
• Medical, Dental, and Vision Benefits
• Free, College-based online courses to further your career
• Referral Programs; invite your friends and family
• This is a Full-time; evaluation to hire position, hiring immediately

What does a Repair Technician do?

Performs testing and diagnostics on a variety of servers and components. Prepares documentation of the results of completed tests and documents failures. Provides feedback about systemic issues that are discovered in testing. Performs repairs to units that fail testing and processes failed components for disposition.

ESSENTIAL DUTIES AND RESPONSIBILITIES

• Test and diagnostics of servers and components.
• Repair or replace parts as necessary for servers
• Troubleshoots technical issues and complete applicable documentation.
• Use of tools and test equipment of various types, to diagnose issues servers
• Disassembles and/or reassembles units according to the applicable work instructions.
• Orders correct parts using the proper procedures.
• Tests units according to work instructions and process flows.
• Responsible for inspecting products to ensure it is labeled correctly.
• Responsible for completing applicable paperwork completely and accurately.
• Responsible for entering repair data accurately into the QMS shop floor system.
• Document and communicate repair issues to engineering
• Data Collection and analysis for use in problem solving an continuous improvement

MINIMUM REQUIREMENTS

• Six (6) months of technical repair experience in a related field required
• Six (6) months experience in debugging and testing of electro mechanical assemblies required.
• A Plus Certification a plus.
• High School Diploma or equivalent.
• Attention to detail is required
• Use of small parts and electrical equipment
• Ability to do all functions in a warehouse; bend, lift, grasp, stand, and walk the entire shift

Don’t miss out on this GREAT full time job!  Apply Today

Immediate Openings for Production Workers in Union, MO

Long term career with potential for growth!

Weekly pay and benefits!

12 hour rotating schedule

Job duties:

• Packing product for shipment
• Feeding raw materials into machines
• Checking for visual quality
• Assisting machine operators
• Working multiple stations
• Other duties as assigned

Don’t wait apply today!

#nowhiring

Ability to follow GMPs (hair nets, gloves, no jewelry etc.)

Ability to work in hot environment

Ability to stand, bend, twist, stoop, perform repetitive motion for entire shift

#nowhiring

We have multiple Factory Production Worker Openings at a Local Manufacturing Company ! 

Now Hiring Factory Production Assemblers to work in Lawrenceburg, TN. 

Temp to Hire!

• All Shifts Available! 1st, 2nd, 3rd Shift- Monday – Friday + Overtime
• Start Immediately – career advancement available!
• Both experienced and entry level positions available 
• $15.91 per hour

Factory Production Assembly Benefits with ResourceMFG:

• Weekly pay; direct deposit options
• Referral Bonus Program; get paid to work with family and friends!
• Medical, Dental and Vision Benefits available to you and your family
• Free, online college courses to advance your career and skills
• Cellphone discounts

Requirements for Factory Production Assembly include:

• No previous factory production assembly experience Needed. On the Job Paid Training provided.
• Ability to Work Overtime.
• High School Diploma or GED Required before converting to Full Time with the company.

We offer UNLIMITED Referral Bonuses!  Who do you know?

Apply Today!

Company in Hemet is looking for an AP to add to their team

Mon-Fri 8:00AM-4:30PM

Experience in AP requested

Quickbooks experience is a Plus***

The ideal candidate will prepare, compile and sort documents for data entry, check source documents for accuracy, verify data and correct data where necessary. Obtain further information for incomplete documents, update data and delete unnecessary files.

Responsibilities:

Requirements:

• 1-5 years of experience in AP
• Proficient in excel and Word
• Phone skills
• Quickbooks experience as a plus. 
• Attention to detail
• Organized
• Team player

Hiring Cherry Picker/Fork-lift in Clayton, OH, Up to $20.50/hr

Shift: 2nd shift but willing to work 1st shift if needed

Hours: 3pm-11pm

 Job Duties:

• Load and unload using the cherry picker
• Moving products with the cherry picker
• Putting product on racks
• RF scan gun
• Fork-lift  

Apply Now

ResourceMFG Now Hiring Metal Finisher

Shift:

Sunday – Thursday (11pm – 7:30am)

Sunday – Wednesday (3pm – 1:30am)

Wednesday – Saturday (3pm – 1:30am)

Primary Responsibilities:

• Ability to use hand and belt sanders to finish product.
• Capable of reading and understanding blueprints, job orders, and drawings.
• Remove dents, scratches, and defects from metal surfaces using hand and power tools.
• Cut, burn, grind, sand, & drill materials as necessary.
• Ensure the proper use of safety equipment and abide by company safety policies at all times.

Requirements:

• Experience in the manufacturing industry
• Knowledge and training of the use of power tools and hand tools
• Ability to read and understand blueprints, drawings, and job orders
• Must be able to stand for long periods of time
• Must be able to lift and/or move up to 50 lbs.
• Must be able to bend, stand reach, pull, lift and carry items in the warehouse
• Able to work overtime and/or weekends when needed

Apply Now! Interview Tomorrow!